Abstract Acrylic on canvas panel - Untitled 2017 #2

Acrylic Pour over texture on Canvas Panel 8x10"

Substrate:  Mont Marte 8x10 inch/20.3 x 25.4cm Canvas Panel.

Background:  Various gels (Golden Course Molding Paste, Golden Glass Bead Gel, Liquitex Blended Fibres, and Liquitex Ceramic Stucco) through stencils were used to create a textured background.

Painting: Dirty pours of different viscosity acrylic paints. The thicker paint needed to be pushed around with a painting knife.

Finish: Atelier Traditional Gloss Varnish.

Frame:  It needs a frame (without glass) but both the white (pictured) and black and timber frames I have don't quite look right either. I think I'm going to have make a frame and paint it. Maybe silver or grey or red?

Abstract - Poured Landscape

When you haven't felt inspired to paint for a very long time, getting motivated is hard. This is my second go at jump starting painting again.

Abstract Poured Landscape over texture & silver paint

I found an 8x8-inch canvas that had texture paste that looked landscape like and painted silver acrylic over it. Then using my fluid mix with blues at the top and greens at the bottom, plus some white, I pushed and tilted the canvas until I was happy with hove the colours had flowed. The only thing is I should have used a warmer colour at the very bottom to give more perspective.

Mixed Media Abstract - Fluid Acrylic Pouring with Acrylic Inks - Untitled

Blue and purple acrylic inks (FW) were poured over a ground of Matisse moulding medium and Golden Glass Bead Gel.

Mixed Media Abstract - Untitled

Mixed Media Abstract - Acrylic Paints, FW and Liquitex Ink pours

I created the texture with Matisse Impasto Medium and Golden Crackle Medium thickly applied with a stencil. When dry this layer was painted with acrylic paints in blues with yellow in the top right. When dry Golden Glass Bead Gel was applied in a few areas.

Subsequent layers of fluid acrylic paint and then acrylic inks until I was happy.

Hear is a close up of the centre left so you can see the different textures and colours flowing better:

Close up: Mixed Media texture using Matisse Impasto Medium, Golden Crackle Paste, & Golden Glass Bead Gel with fluid acrylic paints allowed to flow and blend naturally

Abstract Fluid Acrylic Pouring with ink on Textured Ground #2 - Untitled

After my last few acrylic ink paintings, I ordered more colours from Artifolk and this is the result.

Untitled - poured ink on 12x12x1/2 inch (30x30x1.3cm) stretched canvas textured with painting knife and Matisse Impasto Medium 

I just love the way Art Spectrum, Liquitex and FW inks work so well together. Whether you just tip the canvas or blow through a straw the inks make some great and unexpected patterns.

Abstract Fluid Acrylic Pouring with ink - Untitled

Untitled - poured ink on 12x24x1/2 inch (30x60x1.3cm) stretched canvas

Water was sprayed over canvas then artist acrylic Inks (Art Spectrum Pigmented ink (blue, green, turquoise & white) and Daler Rowney FW in (sun-up blue & genesis green) were poured in lines (I wanted the finished work to be portrait and I worked holding the canvas in the landscape position) and tipped from side to side. I kept doing this until I was happy with the look. I also brushed the sides  with a soft brush so the ink runs would mix roughly.

Abstract Fluid Acrylic Pouring on texture - Untitled

I wanted to try pouring paint onto a textured surface.

Untitled - poured paint on textured ground paint pre-mixed with mediums on 8x8x1/2 inch (20x20x1.3cm) stretched canvas

Texture paste was applied through a stencil. When dry some Golden Glass Bead Gel was applied in a few places and let dry.

Jo Sonja Flow Acrylics OR Matisse Flow (pre-mixed in pouring bottles with mediums) Ultra Blue, Turuoise (Pthalo Blue + Pthalo Green 1:1), Turquoise Lt (Turquoise + White), Opal, and Titanium White.

 

 

Fluid Acrylic Pouring Experiments with viscosity

I've been experimenting with a different viscosity of paint to achieve different effects with pouring. I spray water on the canvas or canvas panel for the paint to run squeeze the pre-mixed fluid paints and twist the canvas. Apply more paint and/or spray water. Also blowing through a straw to push paint around.

Photo1 very thin mix of paint on 4x4 inch (10x10 cm) canvas panels

Photo1 is a mix of Matisse Structure Paint (I didn't have these colours in a flow paint), Atelier Painting Medium, and water. Ratio of 1:1:2. I like this mix, but it is very runny. No 3 is over dried drops of gel.

I had a bit more trial and error using different mediums and mixes of water before I found a thicker version I liked.

Photo2 thin mix of paint on 4x4 inch (10x10 cm) canvas panels

Photo2 uses a mix of Jo Sonja OR Matisse Flow Acrylic, Matisse Varnish (MM7), Atelier Painting Medium, and water. Ratio of 5:2:3:2.

Each mix produces different flows and runs of paint.

Abstract Pouring using Liquitex Airbrush Medium - Untitled

An experiment into alternative mediums for pouring acrylics.

Untitled Acrylic paint pre-mixed with Liquitex Airbrush Medium on 8x8x1/2 inch (20x20x1.3cm) stretched canvas

Painted over a used canvas with some texture using Liquitex Airbrush Medium and some water mixed with Matisse Structure (Pthalo Green, Pthalo Blue, Matisse Indigo) & Jo Sonja Flow Acrylics (Smoked Pearl) - in squeeze bottles to a running consistency.

Close up Acrylic Pour using Liquitex Airbrush Medium & Water

Close up at right shows some of the ridges from the painting underneath and how the paints have flowed, mixed and cracked when dry.





Fluid Acrylic Pouring with Liquitex Pouring Medium (pre-mix method)

A few years ago I discovered a small section in a book - "pours". There are a number of ways of pouring acrylic paint and mediums to use. In essence "pours" or "pouring paint" is pouring fluid paint (either mixed with medium or into a clear medium) on a canvas and either manipulating the paint with tools OR manipulating the canvas for the colours to move creating fluid patterns. The same method is used to create "skins" but instead of the canvas a plastic or glass is used (something that the paint can be pulled off easily when dry).

After a little experimenting with mediums and paints I already had, I purchased some Liquitex Pouring Medium and I found pre-mixing colours with medium gave me the look I wanted.

both paintings use pre-mixed colours on 8x8x1/2 inch (20x20x1.3cm) stretched canvas. Left is the usual 12:1 (pouring medium to paint) mix and Right is 24:1 mix. The colours in the right painting are more transparent

Mixing the medium and paint:

Liquitex recommends 20ml paint to 250ml pouring medium. This is about 1:12, so I measure up the side of a squeeze bottle and mark off the 12th point and then a further 1 point (e.g. a mark at 12cm and 13cm measured from the bottom). Pour the medium in up to the bottom mark then paint till the top mark. Shake. Leave for bubbles to settle (10 minutes of so). 

More medium to paint ratio will create a more diffused look (see example on right above).

Requirements:

materials for fluid paint pours - Liquitex Pouring Medium, bottles for mixing medium & paint, canvas, tray to work over, tools to push pain around with, levels to check work area, paint, gloves

• Canvas or plastic (for skins) to pour onto
• Level Workspace (MUST be level or paint/medium mix will all slide to one end)
• A tray (optional - handy to lean over and catch drops)
• Wire rack (optional - if working on a small canvas something like a cake cooler is good to rest the canvas on)
• plastic or newspaper to cover workspace (I've used clear builders film available from hardware stores. When dry acrylic paint peels off quite easily)
• Bucket of water (optional - use to wash up. I wash  and dry my gloved hands before touching paint bottles again if I've got a lot of paint on them and before taking off the gloves)
• Old towel (cut up into smaller pieces) or paper towels (I prefer the towel)
• Gloves (I use cheap kitchen gloves from the supermarket - they are easy to take off, and you can wash them easily while still wearing them and re-use)
• I would suggest working outside, especially the first few times until you are familiar with how the paint/medium mix flows. It slides over the surface fast and is slippery so very easy to drop or splash.

Method:

1. Tape sides of canvas with masking tape (if you want nice clean edges).
2. Spread a thin layer of Liquitex pouring medium over the canvas (not necessary if making skins).
3. Pour colours from bottles over about three quarters of the canvas.
4. Spread colours around a little with a painting knife/old credit card. The more you spread the more the colours will mix. OPTIONAL
5. Tip the canvas for the colours to run.
6. Pour on more paint if desired.
7. Leave to dry on a LEVEL surface. (Depending on the thickness it can take 24 hours to dry.)

Notes on colours:

Start with analogous colours (colours close on the colour wheel). e.g. blue and green. yellow and red.

Use a white or a very light colour.

Use a dark, but only a little, e.g. if one of your colours is ultramarine, a tiny bit of indigo or prussian blue.
 

Abstract Fluid Acrylic Pouring - Untitled #2013-02

Untitled #2013-02 Ultramarine Blue, Blue Violet, Titanium White, Transparent Magenta & Pale Gold Acrylic paint pre-mixed with Liquitex Pouring Medium on 8x8x1/2 inch (20x20x1.3cm) stretched canvas

Liquitex Pouring Medium and Jo Sonja Flow Acrylics (pre-mixed in pouring bottles at 1:12 ratio) Ultramarine Blue, Blue Violet, Titanium White, Transparent Magenta & Pale Gold Acrylic.

First three colours were spread with painting knife a little and then canvas tilted for colours to flow. Then Next two colours were added and canvas tilted further until satisfied. When it was drying I thought the bottom right corner looked a little dead, but now dry you can see the gold more. But when painting is tilted the gold really sings (unfortunately it doesn't show in the photo).

Abstract Fluid Acrylic Pour - Untitled #2013-01

Untitled 2013-01 - Red, Yellow & White Acrylic paint pre-mixed with Liquitex Pouring Medium on 8x8x1/2 inch (20x20x1.3cm) stretched canvas

Liquitex Pouring Medium and Jo Sonja Flow Acrylics (pre-mixed in pouring bottles at 1:12 ratio) Yellow Lt, Napthol Red Lt and Warm White.